Back to E-form Control Page
E-Form Change Control
Form Name : SE 34/01
Revision History
Revision Number |
Date |
Change |
2.0 |
14/10/1998 |
Initial Release |
2.1 |
22/04/1999 |
Layout changes for filler 2.6 Licensee’s Reference cells added. Ctrl-? For help cell added Issue number incremented Bell fixed for veriant cell Changed so that For LEP & MA with no seats in second row, question re "Vehicle has facility .. according to Clauses ... 34.2.1.3" should allow answer No. Fixed MC with CRA ommitted due to split Made must have at leist 1 anchorage |
2.2 |
13/06/1999 |
Option to claim not applicable because ADR 68/00 not applicable added Issue raised to 4 Bell cells turn off in MB – MD1 if other categories chosen Pop up message for "MB etcNumber of seats with CRA" and "Anchor Fitting Installed" corrected Test Report section bells turned off if 0 CRAs fitted Pop up message re number of CRAs ommitted turn off until number of seats with seat bels completed |
2.3 |
15/09/1999 |
Image changed from FORS to DoTRS, issue and revision numbers incremented, issue date updated. |
2.4 |
6/02/2003 |
Update Departmental Logo. |
2.5 |
7/04/2006 |
Changed question re location from Y/N to dop down with choices Fig6,Fig9,5.4.1 and Not in Zone to reflect changes in cl 34.5 of ADR. Question re distance from SRP limited to Fig6 responses only. Trigger added, attachment and note detected added, revision update on save code added. |
2.6 |
2/11/2007 |
Enlarge Assembly Drawing Number field. General update and tidy up of layout of form. |
2.7 |
21/04/2009 |
Correct code in test result section (regarding requirement to only complete distance when figure 6 used). Increase size of TFId field and make entry of 6 characters mandatory. |
2.8 |
27/07/2012 |
Update Departmental Logo. |